Tubing, Fittings and Connectors
1/2" ID
Tubing
Thick walled (3/32) to prevent kinking.

$0.60/ft    
5/16" ID
Tubing
Thick walled (3/32) to prevent kinking.

$0.50/ft    
1/4" OD
Tubing
$0.20/ft    
1/4" Ball Valve
$5.00    
1/4" Union T
$3.00    
Snail Guard
New smaller height!

$1.50    
Mounting Bracket

Use our float switch mounting brackets to hang any type of device to your tank, sump, etc. Includes necessary zipties. Refer to our products page for more information and pictures of our mounting brackets.

Extra Mount: $7.00     Mount Style:
Mount Extension
6" mount extension. Does not include the mounting bracket in the picture, just the extension attached to the bottom of it. Includes a cable tie for attaching to your mounting bracket.
$3.00    
Float Valve
7.5" long with adjustable arm. Plastic with stainless steel hardware. Can be used both vertically and horizontally. Valves have a .093 orifice and have been tested to 100 psi. Requires 7/16" hole for mounting.
$16.00    
Faucet Adapter
1/2" Male to 1/2" Female with 1/4" quick connect. Use to connect into your houshold water system.
$5.00    
Angle Stop Adapter
3/8" Male to 3/8" Female with 1/4" quick connect. Use to connect into your houshold water system. Insert white gasket into female threads. Finger tighten 1 additional turn when resistance is felt.
$5.00    
Sediment Filter
5 Micron. Spun Polypropylene. 2.5"x 9.88"
$3.00    
Carbon Block Filter
0.5 Micron, 20,000G Chlorine Capacity, 2.5"x 9.88"
$19.00    
Inline Dual TDS Meter
HM Digital DM-1. Know when your RO system needs service.
$29.00    
Drain Saddle
For hookup of waste line from RO to 1.5" Drain Pipe.
$6.00    
RO Faucet
Lead Free, Non-Air-Gap, Chrome. Includes 1/4" connection fitting
$19.00    
MPT Ball Valve
$5.00    
Tank Ball Valve
Used to connect to an RO pressurized storage tank.
$5.00